In this guide, I’ll show you the cheapest way to soundproof a basement ceiling. As a mom of two working from home, I’ve dedicated most of my time working from my basement.
Unfortunately, stomping noises from the floor above me often drive me nuts. That was until I was forced to implement different basement ceiling soundproofing hacks.
These methods are similar to the ones discussed in the previous article on how to soundproof a ceiling without construction.
You don’t have to worry as these are easy to implement and affordable hacks.
You probably won’t have to spend money buying anything.
- 1 Cheapest Ways to Soundproof A Basement Ceiling
- 2 Final Thoughts on Cheapest Way to Soundproof A Basement Ceiling
Cheapest Ways to Soundproof A Basement Ceiling
1. Seal the Gaps
You need to identify holes and gaps on the ceiling that are either letting in or leaking the noise outside. Any crack even the tiniest can leak sound, and no amount of soundproofing technique will help if you don’t seal them.
An excellent way to seal the gaps is by the use of caulking seals. Before applying the seal, you need to clear the area around the cracks to remove dirt, dry it then apply the caulking seal.
The process is pretty straightforward, and you can do it without involving a professional.
2. Use Carpets
One of the cheapest ways of soundproofing a basement is carpeting the rooms above your basements to minimize impact noise. Carpets and rugs are readily available, and they won’t cost you much.
For best results, go for fluffy carpets and rugs, they work best at absorbing noise. You can also add some padding to enhance their effectiveness.
These pads are placed below the carpets or rugs on areas where noise can easily sneak from.
When choosing a rug or carpet, ensure they are denser and thicker for effectiveness. You can also use a floor mat to absorb both impact and airborne noise in your home.
3. Acoustic Panels
Acoustic panels are a convenient means of sound absorption in record studios. These panels include fiberglass and foams, which are installed on the ceiling to absorb noise.
Acoustic foam is sold with hooks on them, so all you need to do is install them on the ceiling. The process is much simple, and you won’t have to involve a professional.
You can follow these steps to help you out:
Measure the area on your ceiling where you intend to install the panels to know the right sizes to purchase. Acoustic panels are of different sizes.
Decide how you will install the panels; some may need to be cut.
Once you have decided on the correct way of installing them, you should get a ladder and install them. Use Green glue to glue the panels on the ceiling.
The glue is both a soundproofing material and an effective adhesive.
After you have glued the panels, you need to nail them to properly avoid any mishaps in the future.
The panels are also quite appealing because they have microsuede, which enhances their appearance and performance.
4. Acoustic Insulation
Insulating joist cavities is also a cheap way of sound absorption, especially if you don’t have drywall. One of the ways to do it is by use of acoustic insulation.
Acoustic wool or foam is an excellent example of acoustic insulation. These materials are installed on the ceiling’s joist cavities and T braces as sound absorbers.
Ensure your stuff these areas with insulation materials for the best results.
5. Install Drywall
Most home’s basements have the floor of the room above as the ceiling, which means it does not have drywall. If your home has drywall, but the sound is still sneaking in or out, you should also consider installing a second layer of drywall.
The process is easy, so you can do it as a DIY project or call a professional. But since you are trying to save up some money, there is no need to get help.
The steps of installing the drywall include:
Getting the right materials and tools such as a measuring instrument, drywall sheets, glue, nails, screws, etc.
Measure the dimensions of the basement, then install the panels then glue them on the ceiling. Remember to also apply adhesive on the joist. Then proceed to install drywall sheets. It is crucial to get the exact measurement for basements to help you with getting the sizes of the sheets. Hang them correctly on the ceiling then drill them on the joist using the screws.
Remember to leave a gap between the drywall and the ceiling as a sound barrier. One way to achieve that is by using resilient channels.
6. Rearrange the Furniture
Another cheaper way of soundproofing your basement ceiling is merely rearranging the furniture in your home. You only need to locate the area that sneaks noise into or out of the basement then places furniture there.
You should select the heaviest furniture in the house, such as bookshelves or couches.
Even though it’s not the ideal solution, it will help lessen the noise. Besides, it is also an excellent way to give your home a makeover.
7. Soundproof Paint
You are probably wondering how paint can soundproof your home. Well, soundproof paint can help lessen the sound energy in your basement.
The paint is applied to the ceiling of your basement, and it works by reflecting noise coming into its source. Unlike regular paint, soundproof paint is made of latex, and it is much thicker.
Its thickness contributes to its ability to minimize noise. The paint is also cheap to acquire and easy to paint.
8. Apply Green Glue
If you want a cheap way to minimize the noise in your home, then Green glue is the solution. You can use the glue to cover the corners of your basement ceiling.
You can also use the glue when installing drywall on your ceiling as an added soundproofing material.
Green glue can also seal the gaps and cracks. Greens glue converts noise energy to heat, which later dissipates.
Green glue is a useful option if you need further sound absorption ideas for sealing cracks or holes.
9. MuteX soundproof mat
You can also try MuteX soundproof material to lessen the noise in your basement. The material is a lightweight but thick material that is similar to a mat that works as a sound barrier.
The material is made of elements such as vinyl that gives it density to minimize noise.
Mutex material works best on its own, but you can also pair it with drywall to enhance its effectiveness.
If you don’t prefer the material, Mass Loaded Vinyl is a better alternative. Install them directly on top of the drywall or apply it to your ceiling’s joist.
Final Thoughts on Cheapest Way to Soundproof A Basement Ceiling
Above are some of the cheapest ways to soundproof a basement ceiling. These are effective methods for anyone who’s on budget.
It’s important to note that these methods won’t eliminate noise problems 100%. However, for maximum effectiveness, you should try combining two or three methods.